Quality Inspector Level 3 (Aerospace CNC)

Overview

Quality Inspector Level 3 (Aerospace CNC) Jobs in Mesa, AZ at Falcon CNC

Senior CNC Quality Inspector (Level 3) – Full Time Hourly

Pay Range: Dependent on Education & Experience

Direct Report: CNC Quality Manager

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Inspect product (Visually & Mechanically) and review documentation at applicable surveillance process steps (In-Process or Final) per print specifications, work orders, sales orders purchase order, and documented procedures
• Perform CMM functions as assigned
• Process accepted material in accordance with documented procedures
• Reject and quarantine suspect material
• Process rejection documentation
• Work with manufacturing to resolve quality issues
• Disposition Material Review Board material and paperwork
• Conduct First Article Inspections
• Customer In-Process Source Inspections
• Certify material being shipped to customers
• If required, review and approve redlines to documentation (as a quality representative)
• Receive and inspect materials
• All other duties as assigned
• Read drawings, models, specifications, and customer requirements. (Required)
• Create AS9102 FAI’s and inspection reports
• In process and final paperwork
• All other duties as assgined

CORE COMPETENCIES

· ACCOUNTABILITY – Accountable for measurable, high quality, timely, and cost-effective results

· INITIATIVE – Takes prompt action to accomplish tasks and meet goals and objectives

· PROBLEM SOLVING/DECISION MAKING – Identifies and analyzes problems weighing the relevance and accuracy of available information. Generates and evaluates alternative solutions and makes effective and timely decisions

· QUANTITY/QUALITY of WORK – Pays close attention to detail. Strives to achieve accuracy and consistency in all tasks

· SERVICE ORIENTATION – Applies effective interpersonal and problem-solving skills when responding to customers, fellow employees, or outside contractors

EDUCATION AND/OR EXPERIENCE:

• Minimum 10 years of experience as a Quality Inspector in a manufacturing environment.
• Experience with geometric dimensioning & tolerancing
• Be experienced in reading blue prints, defining measurement techniques, performing inspections and documenting data.
• Must have experience using magnifying devices, test equipment, and precision measuring instruments (micrometers, indicators, calipers and comparators).
• Shall be familiar with AIS9100 or similar Quality System. Military/Aerospace regulations familiarity is required.
• Read blueprints and specifications: 4 years Required
• Experience in CMM usage and other inspection equipment with minimum 3 years CMM experience.
• Ability to understand aerospace specifications and the flow-down of information
• Ability to assist product and support employees with quality issues when necessary
• Ability to perform First Articles, First Piece, Floor, Receiving, Final and Outside Process Inspection
• High school diploma, GED or equivalent – Must have demonstrated computer literacy.
• Must be a U.S. person in order to comply with all applicable U.S. export control and security regulations
• Conduct first article, in process, and final inspections
• Utilize ERP system (JOBBOSS) to complete tasks
• Thorough GD&T understanding (Required)
• Surface plate inspection experience, Height gage, Micrometers, Calipers, Thread gages, ect… (Required)

WORK ENVIRONMENT:

(*) The work environment for this job is in an office and can require you to go into the manufacturing shop floor, which is heated and air-conditioned. The noise level is usually high due to industrial machines. This position requires frequent walking, frequent standing, frequent lifting, frequent typing, frequent use of a computer screen, as well as sitting at a desk.

PHYSICAL DEMANDS:

(*) The position requires that the employee be regularly required to stand, move, talk, see, and hear. The employee is regularly required to life, stand; walk; reach with hands and arms. Must be able to lift and/or move up to 40 pounds. Specific vision abilities include close, distance, and color vision. Specific physical abilities include abilities to move items in all directions with body, hands, and fingers.

(*) Note: Both the Physical Demand and Work Environment sections are required by the Americans with Disability Act (ADA).

WORK LOCATION:

• One location; Mesa, AZ 85212 (Required)

PRIMARY LANGUAGE:

• English (Required)
• Bilingual skills preferred (English/Spanish)

WORK AUTHORIZATION:

• United States (Required)
• Must be a U.S. person in order to comply with all applicable U.S. export control and security regulations

Job Type: Full-time

Pay: $25.00 – $32.00 per hour

Work Location: In person

Title: Quality Inspector Level 3 (Aerospace CNC)

Company: Falcon CNC

Location: Mesa, AZ

Category: